Hired Guys

The Water Delivery Company is always asked the same queries and in answer to that we’ll use these notes to give some simple outlines to the most often . One of the foremost things that seem to arise when someone gets a cooler for the first time is ‘How Do I the Drip Tray?’.Over time the drip reservoir of the water coolers will flow over and unless its drained you’ll get water damage - damaging a laminate or wooden floor or possibly damaging a carpet - so keeping on top of the water drip tray is essential. Another glitch that can arise from not emptying the drip tray is the build up of algae and bacteria - the drip tray looks uglyand unsanitary. To begin - take off any tray which may sit on top of your drip reservoir. Many water coolers have this and they are there just to support the cup as you pour water. With a littel firm pressure the drip trays can easily unclip allowing the grill to be removed. Once the grill has been removed you’ll have a firmer hold on the drip tray itself. Again using firm pressure draw the drip tray towards you and you’ll find it unclips. Drain any water into a bucket or sink. Give the inside of the drip reservoir a wipe with a cleaning cloth and you may like to use a little gentle cleaning fluid or detergent at this stage just to disinfect the drip tray and maximise its hygiene level. Once the dripreservoir is empty you can simply push it back into its home using firm pressure. You’ll sense the snap as it clips back into place. And finally replace the grill if the reservoir has one and you’re finished!